首页>新闻>内容
油库漏油的机械堵漏方法
- 2021年9月30日 -

机械堵塞方法采用机械方法形成新的密封层,从而堵塞称为机械堵塞方法的泄漏方法。该方法广泛用于油箱,管道,过滤器和其他设备泄漏堵塞内外。顶部压力堵塞方法。直接或间接地固定油箱和管道上的螺钉的方法,以堵塞油箱和管道上的泄漏称为顶部压力堵塞方法。该方法适用于堵塞油箱和中低压管道中的砂孔,腐蚀孔或弹孔等小孔。②夹紧堵塞方法。使用夹具(夹具)垫圈和腺体在内部或外部的孔中紧密按压,以消除一种称为夹紧堵塞方法的方法的泄漏。该方法适用于低压管线或小直径,便于操作:堵塞设备。支持堵塞方法。在设备,油箱,管道外部支撑框架外,用工具和密封垫插入泄漏的方法,称为支撑堵塞方法。 This method is suitable for oil tanks, filters and other large equipment container wall leakage treatment. ④ Gland plugging method. The use of bolts will seal gasket and gland tightly pressed in the hole inside or outside, so as to eliminate the leakage method called gland plugging method. This method is suitable for low pressure and easy to operate oil depot equipment and pipeline plugging. Package plugging method. The plugging method, which uses the metal sealed cavity to cover the leakage and fills the cavity with sealing filler or the joint with sealing pad, is called the wrapping plugging method. This method is suitable for pipeline, flange, thread and other leakage treatment. ⑥ Clamp plugging method. The method of using hydraulic clamping device to clamp the leakage, so that it is deformed and compact or make the sealing pad close to the leakage, so as to eliminate the leakage is called clamping plugging method.